OneDrone 5.8GHz Almighty 2.200mW TX32 Gold

  • OneDrone
  • CR-ALM-tx22
  • 135
  • 2
  • 134.90€

  • Ex Tax: 110.57€
- OR -

Are you tired of choosing right 5.8 frequency band. One transmitter on one frequency, second on other, video goggles on third ... frustration guaranteed. You can solve all this issues with one almighty TX: transmitter which will work with all your 5.8G receivers.

Stop dealing with frequencies. Start flying!

With a wide 7V - 25V input voltage range, gone are the days where a separate transmitter battery is needed, nor is a step down voltage regulator required. If you are flying a 6S 22.2V power system, this unit can be tied directly into your power system for simplicity & ease when it comes to powering this transmitter.

Offered in multiple power outputs, this 32 channel 5.8GHz FPV video transmitter provides the effective range & capability you are looking for, allowing you to select the power output capability your system needs.

Compatible with both DJI & Fatshark / Immersion RC products, this 32 channel system is everything you will need in a light, compact and powerful video downlink system.

Functioning Band Frequencies:

A: 5865 5845 5825 5805 5785 5765 5745 5725
B: 5733 5752 5771 5790 5809 5828 5847 5866
E: 5705 5685 5665 5645 5885 5905 5925 5945
F: 5740 5760 5780 5800 5820 5840 5860 5880


32 Channel Capability
7V - 25V Operating Range (2S - 6S LiPo Compatible)
Extreme Power / Extreme Range
Built In Cooling Vents
Push Button Channel Selection
LED Channel Indicator
DJI / Fatshark / Immersion RC Compatible
Light Weight / Compact Size
5.8GHz Technology


(1) 2200mW 5.8GHz Video Transmitter w/ Cables & Wires
(1) Dipole Antenna
(1) English Manual


Output Power: 2200mW
Current Consumption: High
Input Power: 7V - 25V DC
Working Temperature: -10~+85°C
Connector Type: SMA Female Jack
Antenna Gain: 3dB
Antenna Impedance: 50 ohms
Video Standard: NTSC / PAL Auto
AV Input: Analog AV Signal Input
Frequency Control: Built In Frequency & Phase Lock Loop
Size: 62mm x 42mm x 20mm
Weight: 60g

A Note on 5.8GHz: For FPV flying, the 5.8GHz bandwidth is highly popular, and used often in multiple FPV applications. However, due to the very high frequency of the 5.8GHz bandwidth, "multi path" distortion is highly common, and with stock "whip" style antennas, 5.8GHz systems suffer greatly.

By utilizing a "Circular Polarized" antenna, video drop outs are reduced by a huge margin, and overall video clarity increases dramatically. By using a circular polarized antenna via your transmitter and receiver, multi-path rejection is added to your FPV system, allowing you to focus on the fun of flying, all the while extending your overall range & video signal clarity.

Disclaimer: A/V transmitters operating beyond 25mW may require HAM radio licensing in certain areas. It is the customers responsibility to secure proper licensing if such systems are to be purchased.

Regulatory Notice
The use of this product may be prohibited in your country/region/state. Please verify that the RF output power and frequencies used by this transmitter comply with local rules in regulations, this product may require a HAM license to operate.

In EU, max. output power of video transmitters for general unlicensed use is limited to 25mW on 5.8GHz and to 10mW at 2.4GHz frequency. Transmitters with bigger output power may be legally used if you have HAM license (you can ask about obtaining a license in your local radio club) or if you are using this product for research/scientific purposes in controlled environments.

Write a review

Note: HTML is not translated!
    Bad           Good
Related Products