OneDrone Demo Team Official Wing BnF

  • TBS
  • TBS-wingBNF
  • 1500
  • 6
  • 1,499.90€

  • Ex Tax: 1,229.43€

Available Options

- OR -


Just bind and fly. This mega COMBO includes:
- EPS wing cores, handcut by OneDrone Demo team leader Snoopy & his team
-
CNC milled elevons & laser cut motor, camera and battery mounts
- 3D printed bays for vTX & UHF RX
- TBS 59 FPV camera
- TBS Unify 800mW 2.4GHz video TX
- TBS Core PRO + GPS module
- O.S. OMA-3820-1200W high end electric motor
- TBS Zephyr Folding Prop Set
- Graupner Brushless ESC +T 70 D3,5 XT-60
- Immersion RC EzUHF 8ch Diversity RX
-
2x Gens Ace 3300mAh 4S batteries

Wing comes fully assembled, with all electronics installed & tested ... and fully covered with thick transparent film for extra stiffness and durability.


NOTE: Wing is made from EPS foam, which is very light (and very stiff when laminated), but not so durable as EPO or EPP foam. We would like to point out, that this wing is NOT plane for beginners, but for experienced fliers (who tends to fly, not crash) which will appreciate it extreme flying capabilities.

Customers can also personally pickup the plane and we can arrange flyin session with OneDrone Demo Team for all the buyers.

Since original TBS Zephyr is not available any more, OneDroneDemo team Official Wing is probably one of the best - if not the best high-end FPV wings on the planet. Shape and profile are shaped to perfection through more than 500 hours of flying of OneDrone Demo Team Members. Carefully choosen shape and profile enables flying with very low minimal speed as well as very fast (up to 200 km/h) FPV flying.

Complete building process is documented step-by step on Snoopy's FPV Life FB Profile

Here you can see some videos, taken with this wing (and much more at FPVwinger Youtube channel)

 

Wing specifications
Wingspan: 1.410 mm
Total weight (without batteries): 1.345 g
Flying weight (with 2x 4S 3300 Gens Ace Batteries): 2.065 g

Motor Specifications    
Connecting plug    G 3,5
Number of poles    14
Operating voltage range    11,1...14,8V
Diameter    37,5 mm
Recommended controller    60-70A
Free shaft length    11,5 mm
Case length    43,3 mm
Maximum efficiency    85 %
Case diameter     37,5 mm
All-up weight    approx. 155 g
Overall length    approx. 59 mm
Output    428 W
Max. output at nominal voltage    652 W at 14,8 V
Thrust in N (1 N = 100 g)    17
Recommended propeller    11x5
Max. charging rate    75 A
Revolutions/Volt    1200
Shaft diameter    5 mm
Turns    10
Permissible motor direction    R and L

ESC Specification
Weight incl. leads: 73 g
Reversing: programmable
Continous current : 70 A
BEC : 5.0...8.0/3 V/A
Soft start : programmable
EMK brake: programmable
Pulse frequency : 32 kHz
Dimensions with capacitor : 70 x 31,5 x 10 mm
Battery plug connection: D3.5 (XT-60)
Cell count, LiPo, Lilo: 2 ... 6
Cell count NiCd, NiMH: 6 ... 18
BEC current short-term: 10 A
Dimensions without capacitor : 55 x 31.5 x 10 mm
Operating voltage : 5,5 ... 25 V

 

Write a review

Note: HTML is not translated!
    Bad           Good
Related Products