GoPro3 60° Tuning Lens
- Ex Tax: 114.67€
60 ° Lens for change GoPro3 series TUNING LENS
GoPro 3 lens replacement
A new TUNING LENS is finally available for the GoPro3 Black and GoPro3 + Black available. With the 60 ° Lens V3, it is now possible without distortion (fish eye) with the GoPro create 3 Black videos. After the release of the original lenses you can change the lens simply screws into the GoPro 3 Black, focus, and with some Teflon tape around the threads sits the 60 ° fixed properly in the GoPro 3 It's every mode of WVGA up to 4K with 60 ° lens.
The GoPro3 Black also fits with the 60 ° lens in the underwater housing. The 60 ° lens is available for the GoPro Hero 3 Black and White Edition. A new lens is finally available for the GoPro 3 Black and White Edtion. The 60 ° V 3 lenses, it is now possibleness without distortion (fish eye) to create the GoPro 3 Black videos. After the release of the original may be the interchangeable lens lenses simply screw into the GoPro 3, to focus and with some Teflon tape around the threads sits the 60 ° fixed Properly in the third GoPro Below is a conversion workshop video!
Tip: When the interchangeable lens, you should (1 layer) some Teflon tape around the threads set. As a result, the lens sits beautifully in the GoPro3.
Hint: If the lens Should Be (1 layer), some Teflon tape around the threads define. . This sits nicely in the lens in place of the GoPro delivery: 1x 60 ° lenses V3 with special filter 1x O-ring worn on the gap between the lens and camera
Warning: You must open your GoPro lens to replace the original. Pimp your copter accepts no liability for any damage to the camera caused by such modifications or the use of the lens. Note: you must open your GoPro to replace the original lens can be. Pimp your copter Assumes no liability for any damage to the camera or Modifications Caused by seeking the use of the lens.
The GoPro Silverlight 3 can not be easily rebuilt. To screw the 60 ° in the Silver, you would have even from the 60 ° Lens 2/3 of the thread from the bottom unscrew something. Else can the 60 ° Lens not purely screw in the lens holder. This is only the Silver Edtion way.