FeiyuTech FY-MG Lite 3-axis Handheld Gimbal for Mirrorless Cameras

  • Feiyu Tech
  • FY-MGLite
  • 700
  • 10
  • 669.90€

  • Ex Tax: 549.10€
- OR -

Product Highlights

  • 2kg Capacity
  • Accepts Mirrorless and DSLR Cameras
  • Single-Handed Configuration
  • 360° Rotation for All Axes
  • Fixed Axes and Pan/Tilt Modes
  • Joystick for Angle Adjustment
  • Four Batteries and USB Charger
  • Includes Protective Case

Mount your mirrorless camera on the Feiyu MG Lite Motorized Gimbal for smooth footage capture. The MG features 3-axis stabilization, compensating for vibration on the pan, tilt, and horizon axes. This stabilization gives your footage a professional look with less camera shake. The simple one-handed design is discreet and packs away easily.

Feiyu has designed the MG Lite to be easy to use, yet versatile. You can set up the gimbal to operate in one of three modes, panning, panning and tilting, or lock mode. Each mode allows for different levels of movement with lock mode attempting to lock the camera's position as much as possible. To control the camera's position, the integrated joystick or the included wireless remote control can be used. All three motors in the M3 can rotate a full 360°, so it won't "freak out" if rotated too far. Once you're done shooting, the MG Lite can be easily folded down for storage in the included protective case.

Accepts a Wide Range of Cameras
Most small cameras weighing up to 2 kg can be used. Larger DSLR cameras like the 5D Mark III can be used with smaller lenses. Mirrorless cameras with larger lenses can be further stabilized by engaging the lens fixing screw.

3-Mode Operation
Panning mode enables the camera to pan left or right and restricts vertical tilts or rolls
Panning and tilting mode enables the camera to pan left or right and tilt up and down, and restricts the rolls
Lock mode keeps the camera in its current orientation and restricts panning, tilting, and rolls

Includes Accessories
USB Cable: For firmware updates and charging the batteries
Rechargeable Batteries: 4 18650 batteries are small, yet 2 will last for approximately 6 hours on a full charge.
Battery Charger: Charges 2 batteries. This way when the batteries inside the gimbal are depleted, just replace them. A separately available USB power adapter is required.
Protective Case: Fits everything that comes with the gimbal, with an extra compartment for essentials.

Write a review

Note: HTML is not translated!
    Bad           Good