Graupner Servo (11g) DES 478 BB, MG 12 mm

  • Graupner
  • GR-DES478
  • 35
  • 16
  • 34.90€

  • Ex Tax: 28.61€
- OR -

DES servos (digital eco servos

A new series of products to complement our existing range of digital servos. These DES servos represent a product line which includes a suitable servo for every type of application, covering a vast range of specifications: different case sizes, gearbox types, torque levels and transit speeds, designed for any modeller from the beginner to the competition pilot. The range includes some fully sealed versions (case screws, case sections and output gear) for increased operational reliability of your models. Servos with precision-made twin-ballraced gearboxes made of aluminium and other metals guarantee superbly accurate positional performance. High-quality Amtel micro-controllers are used to process the control signals and provide good positional accuracy. For RC power models, gliders and micro-helicopters Do not use in carbon wings with RDS with electrical connection or aluminium levers. The gear/RDS or the aluminium levers must be electrically isolated! Potentiometer voltage is present on the gear.

  • Ball bearings Metal gearbox

Info

DES Servo (Digital Eco Servo) A new series of products from the digital servo segment. The DES servos represent a product line which includes a suitable servo for virtually every type of application, covering a vast range of specifications: different case sizes, gear types, torque levels and transit speeds, designed for any modeller from beginner to competition pilot. The range includessome fully sealed versions (case screws, case sections, and output gear) for increased operational reliability of your models.
Servos with precision-made twin-ballraced precision gears made of aluminium and other metals guarantee superbly accurate positional performance.
High-quality Amtel micro-controllers are used to process the control signals and provide good servo positioning accuracy.

Specification

Torque at 4.8V, approx.: 21 N/cm
Transit speed at 4.8V, approx. : 0,13 Sek/40°
Holding torque 6.0V, approx.: 26 N/cm
Charging rate at 4.8V approx.: 420 mA
Transit speed at 6.0 V, approx. : 0,1 Sek/40°
All-up weight, approx.: 11 g
Angular travel incl. trim, approx. : 2 x 45 °
No-load current drain, approx. : 7 mA
Torque at 6.0V, approx.: 26 N/cm
Charging rate at 6.0V approx.: 530 mA
Dimensions (LxWxH): 23,5 x 11,5 x 27 mm
Holding torque 4.8V, approx.: 42 N/cm
Bearings: Lager bb
Replacement gearbox: 7919.2
Gear unit: Getriebe mg
Operating voltage : 4,8 ... 6,0 V
Neutralimpuls: 1,5 ms
Max. Ansteuerfrequenz: 3,0 / 333 ms / Hz

Write a review

Note: HTML is not translated!
    Bad           Good
Related Products